Aastra 9000i Series, Administrator'S Manual

Page: 582 / 1043

41-001343-01 Rev 02, Release 3.2.2 5-305
How it works
When a startup, successful registration, incoming call, outgoing call, offhook, or onhook
call event occurs
on the phone, the phone checks to see if the event has an action URI configured.
If the phones finds a URI configured, any variables configured (in the form
$$VARIABLENAME$$) are replaced with the value of the appropriate variable. After all of the
variables are bound, the phone executes a GET on the URI. The Action URI binds all variables and
is not dependant on the state of the phone.
$$LOCALIP$$
Note: This variable allows for
enhanced information in call
records and billing applications.
IP Address associated with:
•
registered phone
• onhook
$$REMOTENUMBER$$ Remote number associated with:
•
incoming caller
• outgoing caller
$$DISPLAYNAME$$ Display name associated with:
•
incoming caller
$$SIPUSERNAME$$ Username associated with:
•
registered phone
• incoming caller
• outgoing caller
$$INCOMINGNAME$$ Name associated with:
•
incoming caller
$$CALLDURATION$$
Note: This variable allows for
enhanced information in call
records and billing applications.
Duration of last call. This variable is associated with:
•
onhook
$$CALLDIRECTION$$
Note: This variable allows for
enhanced information in call
records and billing applications.
Specifies whether the current/last call was incoming or outgoing. This variable is
associated with:
•
onhook
$$REGISTRATIONSTATE$$ Specifies the state of the phone’s registration. Registration states can be:
•
registered
• unregistered
• expired
• refused
• timeout
$$REGISTRATIONCODE$$ Specifies the code generated during the registration process.
Registration code can be:
"xxx"
where xxx is the 3 digit code; for example, "403". Possible codes are:
• 001 (registration successful)
• 403 (registration failed)
Variable Description