Aastra 9000i Series, Administrator'S Manual

Page: 368 / 1043

41-001343-01 Rev 02, Release 3.2.2 5-91
Use the following parameters to configure preferred line focus using the Aastra Web UI.
Aastra Web UI
1 Click on Basic Settings->Preferences->General.
2 In the “ Preferred Line ” field, select a preferred line to switch focus to after incoming or outgoing
calls end on the phone. Valid values are:
• None (disables the preferred line focus feature)
• 1 to 9
Default is 1 .
For example, if you set the preferred line to “ 1 ”, when a call (incoming or outgoing) ends on the
phone (on any line), the phone switches focus back to Line 1.
3 In the “ Preferred Line Timeout ” field, enter the amount of time, in seconds, that the phone
switches back to the preferred line after a call (incoming or outgoing) ends on the phone, or after a
duration of inactivity on an active line. Default is
0 . Valid values are:
• 0 to 999
4 Click to save your changes.