Aastra 9000i Series, Administrator'S Manual

Page: 217 / 1043

4-54 41-001343-01 Rev 02, Release 3.2.2
3 Enter your Administrator password.
Note: The IP Phones accept numeric passwords only.
4 Select Network Settings.
5 Select Type of Service DSCP.
6 Select Type of Service SIP.
or
Select Type of Service RTP.
or
Select Type of Service RTCP .
7 Enter a value for “ Type of Service SIP ”. Default is 26 .
or
Enter a value for “ Type of Service RTP ”. Default is 46 .
or
Enter a value for “ Type of Service RTCP ”. Default is 46 .
Valid values are 0 to 63 .
Note: If you change the ToS/DSCP setting for a Protocol, and VLAN is enabled, you will need to map
the applicable priority to the Protocol setting as shown in the table “DSCP Range/VLAN Priority” on
page 4-53 For more information, see the section “Configuring VLAN (optional)” on page 4-55 .
8 Press Done (3 times) to save the changes.
Note: The session prompts you to restart the IP phone to apply the configuration settings
9 Select Restart.
For the 6739i:
1 Press the Options key on the phone to enter the Options List.
2 Press Advanced . A keyboard displays.
3 Enter the Administrator password using the keyboard. Default is “ 22222 ”.
4 Press Network .
5 Press to scroll to the next screen.
6 Press Type of Service DSCP .
7 Press Type of Service SIP, and then enter a value for ToS. Default is 26 .
8 Press Type of Service RTP , and then enter a value for ToS. Default is 46 .
9 Press Type of Service RTCP , and then enter a value for ToS. Default is 46 .
10 Press until the Options List screen displays.
11 Press Restart to restart the phone for the change to take affect.
IP Phone UI
Step Action