background image

6/1553-DBC 446 01 Uen G 2012-02-22

6

INTRODUCTION

This document is valid for MX-ONE Telephony System -– Telephony 
Switch and MX-ONE Telephony System – Telephony Server. Whenever 
only one system is applicable, this is specifically stated in the document.

All the procedures, suffix digits, tone messages and times used in this 
document are according to the standard application system.

Not all exchanges are equipped with all features. By categorization, it is 
possible to vary the number of features assigned to each individual 
extension. This can affect the display information. The person (depart-
ment) responsible for telecommunications in your organization will 
inform you which features that have been assigned to you.

The Aastra 7446ip phone conforms to the H.323 and the SIP standards. 
To find out which protocol is active, refer to 4.5 Software Version on 
page 24.

The phone supports Dynamic Host Configuration Protocol (DHCP) for 
determination of IP addresses.

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 

Note:  

Be careful not to keep credit cards near the phone, since they 
may be demagnetized due to the strong magnets in the phone. 

This phone can be used without lifting the handset. When stated 
Lift the handset before dialing a procedure or a phone number 
you can also dial directly without lifting the handset.

For more information, see 3.7.1 Using the Headset on page 19.

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Summary of Contents for 7446ip

































































































Reviews: