IP P
HONE
FOR
MX-ONE
21
6/1553-DBC 446 01 Uen G 2012-02-22
After a power failure the phone restarts automatically.
Note:
During power-up, the phone display is black for a little while.
4.1.1
Logging On to the Network
Your phone might require a network authentication to gain access to the
network. You then have to enter a valid user identity and password.
Note:
The user identity and password used for the LAN access control
are not the same as the extension number and Personal Identifi-
cation Number (PIN) or password you use to log on to the tele-
phony system. Contact the system administrator to obtain a new
password or change an old password.
1.
On the main page, tap the
Enter User ID
field and enter your user
identity (typically the extension number).
If you need to edit the input, tap the
Erase
button.
2.
Tap the
Enter password
field and enter your password. If you
need to edit the input, tap the
Erase
button.
Note:
You can enter the password from the keypad on the phone, or
from the soft keyboard in the display.
3.
Tap the
Log on
button to continue the startup procedure.
If your user identity and password are not accepted, an error
message is displayed. Contact your system administrator.
4.1.2
Logging On to the System
After you have logged on successfully to the network, the display shows
the logon progress. When the self test, has been successfully
completed, the phone either logs on automatically, or prompts you to
enter your extension number and PIN or password.
Update software
If the system detects new software, the following display appears during
the startup procedure:
