6/1553-DBC 446 01 Uen G 2012-02-22
20
S
TARTING
THE
P
HONE
3.7.1.1
Call Handling through the Line Buttons
By default, the phone is set to connect calls to the loudspeaker when you
answer incoming calls, or when you make calls by tapping a
Line
button.
This default setting is known as the
loudspeaker preset mode
. When you
dial a number without lifting the handset, the call is also connected to the
loudspeaker by default.
When you use a headset, you can switch to the
headset preset mode
to
have calls connected to the headset. If the
headset preset mode
is acti-
vated and you press
, the call is connected to the loudspeaker.
Note:
The
headset preset mode
can only be activated and deactivated
when the phone is in idle mode. When you lift the handset to
answer an incoming call, the call is automatically connected to
the handset, regardless of which
preset mode
is active.
4
Starting the Phone
4.1
Starting and Logging On
Depending on the settings in your network and telephony system, the
start up procedure may differ from phone to phone. Check the display on
your phone and read the relevant sections in this chapter to continue
with the startup procedure.
When the phone is connected to the network, your phone automatically
initiates the startup procedure when the power is connected to the
phone.
Activating Headset
Preset Mode
To activate the headset preset mode, press
and hold down for 4 seconds. When
you hear a ring signal, and the headset icon
appears in the display to the right, the
headset preset mode is activated.
Deactivating Headset
Preset Mode
To deactivate the headset preset mode,
press
and hold down for 4 seconds.
When you hear a ring signal, and when the
headset icon disappears from the display to
the right, the headset preset mode is
deactivated.
