Additional Features
41-001524-00 REV01 – 07.2014
159
Preferred Line and Preferred Line Timeout
The 6867i has two parameters called preferred line and preferred line timeout. If you enable the preferred line parameter
on your phone, after a call ends (incoming or outgoing), the display switches back to the preferred line. Next time you go
off-hook to make another call, you pickup on the preferred line. You can enable the
Preferred Line
parameter using the
Aastra Web UI at the location,
Basic Settings > Preferences > General
.
You can also set a
Preferred Line Timeout
parameter
that specifies the number of seconds it takes for the phone to switch back to the preferred line.
The following table provides the behavior of the preferred line focus feature with other features on the phone:
Phone Feature
Preferred Line Behavior
Last Call Return
The phone switches back to the focused line immediately after the call ends.
Speeddial
The line is already specified when the speed dial is created. The phone switches back immediately after the call
ends.
Conference
For incoming calls, the phone switches back immediately after the call ends.
Transfer
For incoming or outgoing calls, the current behavior is that the same line used to transfer the call does not
change. For incoming calls, the phone switches back immediately after the call transfers.
Park
The phone switches back immediately after the call ends.
Voicemail
The phone switches back immediately after the call ends.
Redial
The phone switches back immediately after the call ends.
Dialing
For incomplete dialing on a non-preferred line, the focus does not change if some digits are entered.
If no digits are entered or digits were cleared, the focus changes to preferred line after the time out has passed
without activities.
Caller ID
If the Switch UI Focus To Ringing Line parameter is disabled, the User is able to see the Caller ID when the phone
switches the focus to the ringing line.
Factory Default
Factory default and recovery mode clears the preferred line and preferred line timeout parameters, and the
phone operates in a non-preferred line mode.
Notes:
•
If you specify a value of 0 for the
Preferred Line
parameter, it disables the preferred line focus feature.
•
If you specify a value of 0 for the
Preferred Line Timeout
parameter, the phone returns the line to the preferred line
immediately.
