Aastra 6867i User Manual Download Page 19

Page: 19 / 189

Getting Started

41-001524-00 REV01 – 07.2014

Detailed-View Call Screen

The

Detailed-View Call

screen brings into focus all the information available for a specific call. It is the default screen dis-

played for all active point-to-point calls.

The

Detailed-View Call

screen encompasses the picture ID of the remote party (if available), a call timer indicating the

duration of the call in focus (in minutes and seconds), the caller ID (name and number), and call status and feature indica-
tors.

The following table identifies and describes the call status and call feature indicators on the

Detailed-View Call

screen.

Indicator/Icon

Description

Call Status Indicators

N/A

No icon denotes that the call is connected and in progress.

Indicates the call is on hold.

Indicates the call is an incoming call.

Indicates the call is an outgoing call.

Indicates the party is a conference call participant. The direction of the arrow denotes where the other conference call par-
ticipant is in the list of calls.

Call Feature Indicators

Indicates the call is secured using TLS/SRTP encryption.

Indicates the call is using Aastra Hi-Q™ audio.

Indicates active VoIP recording is enabled and the call is being recorded.

Call Timer

Call Feature
Indicators

Caller ID

Picture ID

Call Status
Indicators

Summary of Contents for 6867i






























































































































































































Search results

Summary of Contents for 6867i

Reviews:

Related manuals for 6867i

Brands by name

Popular brands

Aastra 6867i, User Manual

Search results

Summary of Contents for 6867i

Reviews:

Related manuals for 6867i

Brands by name

Popular brands