HW V4 / © 2005 – 2013 Aaronia AG, DE-54597 Strickscheid
62
Manual Spectran V4
Tips and Tricks
9.3. „Turbo“Sweep for larger frequency ranges
You can achieve quicker measurements of larger frequency ranges by
using the „Full“ filter. To do this, set RBW to “Full” and SwTime to 1mS.
The result is an extremely fast sweep of even large frequency ranges.
As this mode is also specifically designed to apply less interference
processing, it is only recommended for experienced users as a „quick
assessment tool“.
9.4. Allocating keys with your own measurement settings
The keys 0 to 9 can be allocated with custom configurations (incl.
start/stop frequency, RBW etc.) with program numbers 100 to 109
corresponding to the keys 0 to 9.
Simply store the current configuration via the Setpu & Store menu entries
using one of these program numbers, and they will be available at any
time using the corresponding key. It’s even easier with our free PC
analysis software “MCS”. Here you can even attach info texts.
To recall the factory settings, select “Factor” under the “Setup” menu.
9.5. Dect analysis
Using the „0“ key, you can call up the DECT analyser to measure active
DECT phones. By pressing the DECT key (0 key) more than once, you
can even analyze all 10 channels (display reads: “DECT 0-9”)
individually according to the DECT standard. You will quickly be able to
see which of the 10 channels is currently occupied and even when
channel hopping occurs. This channel separation is particularly practical
in Audio mode. Moreover, a very special feature is the AUTOMATIC-
DECT-CHANNEL-HOPPING-MODE
(DECT
Auto-Rotate).
It
is
automatically activated after pressing the DECT key for the first time.
Here, all 10 channels are constantly being measured and displayed one
after the other. Like this, you will never miss a channel hop and can e. g.
quickly evaluate the strongest detected level on ANY channel by using
PkHold. (Chapter 8.6.)
