HW V4 / © 2005 – 2013 Aaronia AG, DE-54597 Strickscheid
38
Manual Spectran V4
Functional description
5.3.28. Setup
(organize programs)
With Setup you can organize individual programs and/or
configurations using the following options.
„
Store
“ save Spectran’s current settings (frequency range,
RBW and so forth) as a „mini program“. The possible target
program numbers are 300 to 400. This way, you can easily
save often needed configurations and recall them at a later
time using the RunPrg option.
Moreover, you can even create your own hot keys: Simply
save your program using a program number between 100
and 109, which will assign your program to keys 0 to 9.
Respectively.
You can then recall these settings at any time by simply
pressing the corresponding hot key.
In addition, you can use our PC software “MCS” to configure
a multitude of further options for each program, among
these a program description of up to 6 characters, which will
then be displayed in the info display (just like e. g.
“GSM900” on hot key 5). By editing the program manually,
you can also configure frequencies more precisely.
However, if you do not provide a description this way, the
info display will not change nor be cleared.
The following information is currently saved by selecting the
“Store” function (MCS labels in parentheses):
Start-frequency - rounded to integers kHz (STARTFREQ)
Stop-frequency – rounded to integers kHz (STOPFREQ)
RBW-filter (RESBANDW)
Video-filter (VIDBANDW)
Sweep-Time (SWEEPTIME)
Attenuator (ATTENFAC)
Reference-Level (REFLEVEL)
Display-Range (DISPRANGE)
Detector-Type (PULSMODE)
Del
” This option permanently erases a previously saved
program. Enter the number of the program to be erased.
„
CalRun
“ This option recalibrates the Spectran noise floor
on different points within the full frequency range and stores
the results permanently.
