AAQ AutoLift AL-3000AG, Installation Manual & Operation Instructions

Page: 7 / 37

Installation, Operation and Parts Manual
7
AL- 3000AG (FL-8801)
Step2: Connect oil hose
(This step is extremely important, so do refer to the diagram for of oil hose connection and understand the following
instructions before proceeding)
1. make sure there is nothing obstructed or dirty left in the hose.
2. Installers have to distinguish where the chief oil hose to be connected by referring to the below two pictures and have the chief hose
connected.
3. See the left picture followed by; two branches of the chief oil hose are going to be respectively connected to the tie-ins for chief oil
hose reserved on the hydraulic block and the other scissor. Similarly, branches of the other two leveling hoses are going to be connected
to the tie-ins reserved for leveling hoses.
4. Check if all connections are tightened.