AAQ AutoLift AL-3000AG, Installation Manual & Operation Instructions

Page: 18 / 37

Installation, Operation and Parts Manual
AL- 3000AG (FL-8801)
7 Base plate slider
8 Rotor shaft
17
MAINTENANCE
Easy and low cost routine maintenance can ensure the
hoist
work normally and safely. Following are requirements for routine
maintenance. You may choose the frequency of routine maintenance by consulting your lift’s working conditions and time.
The following parts need to be lubricated.
S/N DESC
1 Platform slider
2 Joint shaft C
3 Joint shaft B
4 Driving rotor shaft
5 Rotor shaft of base plate
6 Joint shaft D
6.1. Daily checking items before operation
The user must perform daily check. Daily check of safety system is very important – the discovery of device failure before action could
save your time and prevent you from great loss, injury or casualty.
·Check whether oil hose well connected. No leakage is allowed.
·Check the electric connections .Make sure all connections are in good condition.
·Check whether the expansion bolts well anchored.
·Check if safety teeth and safety block matched well or not.
6.2. Weekly checking items
·Check the flexibility of moving parts.
·Check the working conditions of safety parts.
·Check the amount of oil left in the oil tank. Oil is enough if the carriage can be raised to highest position. Otherwise, oil is insufficient.
·Check whether the expansion bolts well anchored.
6.3. Monthly checking items
·Check whether the expansion bolts well anchored.
·Check the tightness of the hydraulic system and screw firm the joints if it leaks.
·Check the lubrication and abrasion circumstance of moving parts.
6.4. Yearly checking items
·Empty the oil tank and check the quality of hydraulic oil.
·Wash and clean the oil filter.
If users strictly follow the above maintenance requirements, the
hoist
will keep in a good working condition and meanwhile
accidents could be avoided to a large extent.