AAQ AutoLift AL-3000AG, Installation Manual & Operation Instructions

Page: 12 / 37

Installation, Operation and Parts Manual
12
Step8: Install oil hose protectors.
3.4 Items to be checked after installation.
S/N Check items YES NO
1 Are two platforms adjusted with the same level?
2 Are oil hose tightly connected?
3 Are all electric connections correct?
4 Are valves of the pump unit oil tight?
AL- 3000AG (FL-8801)
OPERATION INSTRUCTIONS
4.1 Precautions
4.1.1
Check all the joints of oil hose. Only when there is no leakage, the
hoist
can start work.
4.1.2
The
hoist
, if its safety device malfunctions, shall not be used.
4.1.3
The machine shall not
hoist
or lower an automobile if its center of gravity is not positioned midw
ay
of the rising platforms
Otherwise, EverLift as well as our dealers will not bear any responsibility for any consequence resulted thereby.
4.1.4
Operators and other personnel concerned should stand in a safety area during lifting and lowering process.
4.1.5
When platforms being raised to the desired height, switch off the power at once to prevent any wrong operation done by
unconcerned people.
4.1.6
. Make sure the safety lock of the
hoist
is engaged before start working under the vehicle and no people under the vehicle
during lifting and lowering proce