manualshive.com logo in svg

AAON Pioneer Gold, Technical Manual

Share
Download
AAON Pioneer Gold Technical Manual Download Page 60

TABLE OF CONTENTS

OVERVIEW .................................................................................................................................... 2-3

NAVIGATION ................................................................................................................................ 2-4

Main Screen Icons and Functions .........................................................................................................................2-4

Manager Settings Screen Icons and Functions ....................................................................................................2-4

Administrator Settings Screen Icons and Functions .............................................................................................2-5

Navigation Buttons ................................................................................................................................................2-5

Configuration Buttons

 ...........................................................................................................................................2-5

MAIN SCREEN .............................................................................................................................. 2-6

ADMINISTRATOR STEP-BY-STEP GUIDE ..................................................................................... 2-6

SETTINGS SCREENS .................................................................................................................... 2-7

Logging In .............................................................................................................................................................2-7

Editing Passcodes ................................................................................................................................................2-8

Setting The Date ...................................................................................................................................................2-9

Setting The Time and Daylight Savings Time .....................................................................................................2-10

Setting Schedules ............................................................................................................................................... 2-11

CONFIGURATIONS ..................................................................................................................... 2-12

SETPOINTS ................................................................................................................................ 2-14

USB FUNCTIONS ........................................................................................................................ 2-16

NETWORK SETTINGS ................................................................................................................ 2-17

INPUTS AND OUTPUTS STATUS ............................................................................................... 2-18

ALARM STATUS .......................................................................................................................... 2-19

TROUBLESHOOTING .................................................................................................................. 2-20

APPENDIX .................................................................................................................................. 2-21

Remote Touch Screen Sensor Override Operation ............................................................................................2-21

PLEASE NOTE

This technical guide does not include a depiction of every Pioneer Gold Touch Screen 

screen. Additionally, screens that are depicted are subject to change. 

AAON P/N: G011011, Rev. 01D

Copyright October 2020 © AAON  

All rights reserved throughout the world.

AAON, Inc.

2425 South Yukon Ave • Tulsa, OK 74107-2728

Ph: (918) 583-2266 • Fax: (918) 583-6094

AAON

®

 is a registered trademark of AAON, Inc., Tulsa, OK.

BACnet

®

 is a registered trademark of ASHRAE Inc., Atlanta, GA.

AAON

®

 assumes no responsibility for errors or omissions in 

this document.

This document is subject to change without notice.

Summary of Contents for Pioneer Gold































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands