Zone
Zone
Pioneer Gold 1.10 & 2.05 Touch Screen Operator Interface
LOGGING IN
2-21
APPENDIX
Remote Touch Screen Sensor Override
Figure 32: Touch Screen Sensor
Touch Screen Sensor Override
The Pioneer Gold Remote Touch Screen Temperature and Humidity
Sensor has an override feature. As shown below in
Figure 32
, the
silhouette on the main screen of the Touch Screen Sensor will be shaded
black during the occupied mode and will be shaded white during the
unoccupied mode.
Configuring Occupancy Override
Occupancy override has a system default of 120 minutes and a user-
adjustable range of 1 - 120 minutes. You can change this value in the
Touch Screen Setpoint Screens under User Occupancy Override Time
(see
page 2-15
). To disable the override feature, enter a 0 (zero).
Using Occupancy Override
While in Unoccupied mode, from the Touch Screen Sensor’s main dis
-
play, press and hold the white silhouette for 5 seconds. The screen will
display, “Occupied” and 5 seconds later it will display, “Occupancy
Override”, and the silhouette will turn black.
To reset the override before the configured time period ends, press the
silhouette again for 1 second and the screen will display, “Override
Timer Reset” for a few seconds. The override timer will reset to 0 and
start over, and the screen will return to “Occupancy Override”.
To end the override early, press the silhouette for 5 seconds. The screen
will display, “Occupied” for 5 seconds and then display, ”Unoccu
-
pied”, and the silhouette will return to white, ending the override early.
