Page 54
Aanderaa Data Instruments AS – TD302
The
Mode
property will require a
Reset
before the change is executed. All other property changes will be executed
immediately.
Some property changes will automatically restart the collection of pressure samples, refer chapter 2.4.
Some properties are passkey protected and will not be accessible without first writing the passkey. If the passkey is
needed you get the error message: “ERROR PROTECED PROPERTY”. Refer chapter 1.5 for properties and chapter
7.2.4 for passkey.
7.2.9
Formatting the output string
The property called
Enable Text
controls the presentation of measured data. When the property is set to
Yes
the
output string includes the descriptive parameter name with engineering units of measure. When the property is set
to
No
, the output parameters are presented without descriptive parameter names and engineering units; the
parameter order is the same, refer Figure 7-4 for an example.
The property called
Enable DecimalFormat
controls the format of the output values, either as decimal numbers
(
Yes
), or in exponential format (
No
). Refer Figure 7-7 for an example.
Figure 7-7 Example of output string: decimal/exponential format.
The property setting affects the presentation of measured values in the output string, not in the sensors response to
the
Get
command (which is always in exponential format).
