3. Setting Command – s**
Communication for RA2000 series (1WMPD4003507)
3-25
SBR Setting basic Recording setting
3.14. Compatibility with Older Series
This section describes commands for compatibility with the old series RA1000.
Although these commands cannot achieve the same executions as the old series due to the function
differences, they take the similar setting process.
The compatible commands are described below. For controlling RA2300MK
Ⅱ
, we recommend to use
the command mentioned in each description field.
SRM (Set Recording Mode) Setting measurement mode
SAC (Set Auto Copy)
Set auto copy
SMI (Set Memory autocopy Icon) Sets auto copy
Function
Settings time axis display
SBR P1, P2, P3, P4 (Delimiter)
Input Format
P1: <Reserved>
Invalid
P2: Time axis display setting
(
1=Value, 2=Time, 3=Period
)
P3: <Reserved>
Invalid
P4: <Reserved>
Invalid
Output Format
None
Description
While the RA2300 is operating, an execution error occurs.
Function
Sets measurement mode.
SRM P1 (Delimiter)
Input Format
P1
P1 RA1000
measurement mode setting
RA2300MK
Ⅱ
measurement mode setting
1
Memory recorder
Memory recorder
2
Real-time Pen
recorder
3
Transient To
multi
recorder
4
Filing HD
recorder
5
FFT
An error occurs due to no
support.
Output Format None
Description
The recommended command is “SMM (Set Measure Mode) Setting
measurement mode”.
Function
Sets ON/OFF the auto copy of the memory mode.
SAC P1: (Delimiter)
Input Format
P1: Sets auto copy (0=OFF,1=ON)
Output Format
None
Description
While the RA2300MK
Ⅱ
is operating, an execution error occurs.
Function
Sets ON/OFF auto copy
SMI P1 (Delimiter)
Input Format
P1: Sets auto copy (0=OFF,1=ON)
Output Format
None
Description
While the RA2300MK
Ⅱ
is operating, an execution error occurs.
Summary of Contents for Omniace RA2000 series
