![background image](http://html1.mh-extra.com/html/aandd/omniace-ra2000-series/omniace-ra2000-series_instruction-manual_3072411037.webp)
3. Setting Command – s**
Communication for RA2000 series (1WMPD4003507)
3-3
3.3. Waveform Chart Recording
SCS (Set Chart Speed) Setting paper feed speed of waveform chart
printing
Function
Sets paper feeding speed of waveform chart recording.
SCS P1, P2 (Delimiter)
Input Format
P1: Setting speed
P1
Speed value
1-100
Speed numerical value Resolution 1, Recording unit is set
by P2.
E
External synchronization recording External synchronization
pulse is set by P2.
P2: Speed unit (When P1=1 to 100) (Can be omitted.)
P2
Speed unit
1
[mm/s]
2
[mm/min]
Omitted [mm/s]
P2: External synchronization pulse ratio (When P1=E) (Can be omitted.)
P2
Sets speed value
1
0.1mm/pulse
2
0.025mm/pulse (Not available in RA2800)
Omitted 0.1mm/pulse
Output Format None
Description
The operations above are applicable when the mode is other than in X-Y or
Data Chart.
For X-Y, refer to SCS X-Y Data Sampling Speed Settings.
For Data Chart, refer to SCS Data Chart Recording Speed Settings.
The speed value settings can be set to User2.
Summary of Contents for Omniace RA2000 series
