A&D Omniace RA2000 series, Instruction Manual, Page: 44 / 114

3. Setting Command – s**
Communication for RA2000 series (1WMPD4003507)
3-10
3.8. Amp Unit
Names of input units are represented by the following symbols.
Name of Amp Unit
Symbol Name of Amp Unit Symbol
2-CH high resolution DC amp unit HRDC TC/DC amp unit TDC
2-CH FFT amp unit FFT F/V converter unit FV
2-CH high speed DC amp unit HSDC 2-CH vibration/RMS amp unit RMS
2-CH AC strain amp unit ACST 2-CH DC strain amp unit DCST
Event amp unit EV 2-CH zero suppression amp unit HRZS
2-CH TC/DC amp unit TCDC
SCH (Set CHannel) Setting HRDC amp
Function Sets HRDC amp.
SCH P1, P2, P3, P4, P5, P6, P7 (Delimiter)
Input Format
P1:Selecting channel
P2: Amp type
P3: Input
P4: Setting range
P5: Filter
P6: Position
P7:Input combination
[1-16, A] for RA2300MK
Ⅱ
and
[1-32, A] for RA2800A A means a batch setting.
1 fixed
0=OFF, 1=ON, 2=GND
1=500V, 2=200V, 3=100V, 4=50V, 5=20V, 6=10V,
7=5V, 8=2V, 9=1V, 10=500mV, 11=200mV,
12=100mV
0=OFF, 1=30Hz, 2=300Hz, 3=3kHz
[-100.00 to 200.00] Step 0.05
1=AC, 2=DC
Output Format None
Description When P1 = A, the other selections apply to all the channels corresponding
to the selected type with P2.
When the amp type of selected channel does not correspond to P2, a
parameter error occurs.
While any action other than a chart recording is executing, an execution
error occurs.