A&D Omniace RA2000 series, Instruction Manual, Page: 52 / 114

3. Setting Command – s**
Communication for RA2000 series (1WMPD4003507)
3-18
3.9.Setting for Display and Printing
SWD (Set Scale Wave Division) Setting Waveform Division
SWF (Set Scale Wave flame) Setting Waveform Frame size
* ON/OFF of the scale display and the digital display, etc. cannot be set by the communication
command
.
Function Sets Waveform Division
SWD P1 (Delimiter)
Input Format
P1: Division [1-16]
Output Format None
Description While the recorder is operating, an execution error occurs.
Each setting for frame width and channel will be operated by SWF
commands.
Function Sets Waveform Frame size
SWF P1, P2, P3 (Delimiter)
Input Format
P1: Frame
P2: Size
P3: Display channel [1-16]
[10-200]mm 5mm step
[0-FFFF]ASCII-HEX format for RA2300MK
Ⅱ
[0-FFFFFFFF]ASCII-HEX format for RA2800A
Output Format None
Description While the recorder is operating, an execution error occurs.
The frame becomes the order from 1 to 16 from the uppermost part to the
lower side for RA2300MK
Ⅱ
and the order from 1 to 32 for RA2800A.
The range of the frame specification (P1) changes according to the
waveform record number of segmentations. (ex. in case where
waveforms divide into five, range from 1 to 5)
When the sum total of the size of the frame exceeds 200mm, this case
becomes a parameter error
ASCII HEX format of the channel pattern shows LSB=1 channel and
MSB=16 or 32 channels in a bit format.