A&D Omniace RA2000 series Instruction Manual Download Page 5 | Manualshive

Page: 5 / 114

background image

1

Introduction

We thank you for your purchase of our product OMNIACE RA2000 series (RA2300MK

Ⅱ

and

RA2800A). Please read this manual before operating this instrument. Refer to this manual to operate
the LAN interface which is provided as standard in the RA2000 and the RS-232C interface included in
the optional RS-232C unit (RA23-142). This manual provides the information necessary to operate the
RA2000 series recorder safely. Place this manual within reach of the RA2000 series.

For basic operations, please refer to the RA2000 series Recorder Manual. Please read the user’s
manual of the PC or modem before connecting the RA2000 series to a PC or modem. If you encounter
any problems in the manuals, please contact our sales representative.

This manual covers handling precautions and basic command operations of the RA2000 series
communication interface. For operation of basic functions, please refer to the separate-volume
manuals listed below.

<RA2300MK

Ⅱ

>

Manual

Contents

Instruction Manual
MAINFRAME for RA2300MK

Ⅱ

This manual explains functions and how to operate the RA2300A.

Instruction Manual
Amplifier Units
for RA2000 series

This manual explains how to use and install amp units.

<RA2800A>

Manual

Contents

Instruction Manual
MAINFRAME for RA2800A

This manual explains functions and how to operate the RA2800A.

Instruction Manual
Amplifier Units
for RA2000 series

This manual explains how to use and install amp units.

█

Before Using

►

When opening package

If opening the package in a warm room during the cold season, open the package after it has
reached room temperature to avoid any operational failure due to condensation on the surface of
the product.

►

Examining contents in package

This instrument is delivered after a thorough examination at the factory prior to shipment. However,
please examine the product's condition and verify that no obvious shipping damage has occurred
after opening the package. Also, examine the specifications of the input units and accessories. If
there are any missing or damaged items, please contact our sales representative.



Turn off the power when the operation is abnormal.



If it is impossible to trace the cause of an abnormal operation, please contact our sales

representative. In this case, let us know in what way the unit was operating incorrectly and what the
environmental conditions were.



The contents of this manual are subject to change without notice.



This manual is copyrighted with all rights reserved. No parts of this manual may be transcribed or

reproduced without written permission.



Please let us know if there are any points that are unclear or missing in this manual.

«
...
3
4
5
6
7
...
»

Summary of Contents for Omniace RA2000 series



















































































































Reviews:

No comments

Related manuals for Omniace RA2000 series

Brand: promesstec Pages: 165

Brand: Datafox Pages: 109

i-bus BDB/S 1.1

Brand: ABB Pages: 43

RapidRH L6 with Bluetooth

Brand: DATAGRABBER Pages: 11

Brand: LogTag Recorders Pages: 46

Brand: Fluke Pages: 80

Brand: Observator Instruments Pages: 15

Brand: Texas Instruments Pages: 78

Brand: Ebro Pages: 42

Brand: Agilent Technologies Pages: 273

Brand: Teracom Pages: 38

Brand: Teracom Pages: 43

Brand: Teracom Pages: 51

Brand: Noraxon Pages: 24

Brand: Noraxon Pages: 38

Brand: HYDROLOGICAL SERVICES Pages: 38

Brand: HyQuest Solutions Pages: 24

Brand: HyQuest Solutions Pages: 37

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands