A&D FZ-1200CT, Instruction Manual

Page: 33 / 84

31
9-6 Description of the Item “Data Format”
A&D standard format 5if type 0
This format is used when the peripheral equipment can receive the A&D format. If an AD-8121B
printer is used, set the printer to MODE 1 or 2.
This format consists of fifteen characters excluding the terminator.
A header of two characters indicates the balance condition.
The polarity sign is placed before the data with the leading zeros. If the data is zero, the plus
sign is used.
The unit, consisting of three characters, follows the data.
Output example:
Print example:
DP (Dump print) format
5if type 1
This format is suitable for the peripheral equipment that prints the received data as is.
When an AD-8121B printer is used, set the printer to MODE 3.
This format consists of sixteen characters excluding the terminator.
A header of two characters indicates the balance condition. No overload header is used.
The polarity sign is placed before the data, with spaces in place of leading zeros, if the data is
not zero or overloaded.
The unit, consisting of three characters, follows the data.
Unit
Data Header
S T , + 0 0 0 1 . 2 7 8 c t
CR LF
Terminator
Terminator
W T + 1 . 2 7 8 c t
CR LF
Header Data
Unit
Terminator
W T + 1 . 2 7 8 c t CR LF
Header Data Unit