A&D FZ-1200CT, Instruction Manual

Page: 13 / 84

11
5. WEIGHING
The default settings of the unit of weight are the metric carat (ct) and grams (g).
Pressing the MODE key switches the displayed unit, between ct and g.
To use other units, refer to “9-9 Storing Units” on page 37 to store the units.
5-1 Basic Operation
1 Place a container (carat pan) on the weighing pan, if
necessary.
Press the RE-ZERO key to cancel the weight (tare). The
balance displays 0.000 .
2 Place a sample on the pan or in the container.
3 Wait for the stabilization indicator to be displayed. Read
the value.
While the stabilization indicator is on, pressing the PRINT
key will output the weight value, using the RS-232C serial
interface.
Note
Peripheral equipment, that is sold separately , such 4
Remove the sample and container from the pan.
Notes
When other units of weight are stored as described in “9-9
Storing Units”,
pressing the MODE key switches the
displayed unit.
Press the SAMPLE key to turn on or off the minimum
weighing value.
When the ON:OFF key is pressed with a container placed
on the weighing pan, the balance displays
0.000 and
weighing is started,