A&D FZ-1200CT, Instruction Manual

Page: 73 / 84

71
FX-1200CT FX-700CT FX-500CT
1260 ct 760 ct 510 ct
Weighing capacity
252 g 152 g 102 g
1260.042 ct 760.042 ct 510.042 ct
Maximum display
252.008 g 152.008 g 102.008 g
0.001 ct Minimum weighing value (1 digit)
0.001 g
Repeatability (Standard deviation) 0.001 ct / 0.0005 g
Linearity ±0.002 ct / ±0.001 g
Stabilization time (typical at FAST) *1 Approx. 2 seconds
Sensitivity drift
(10°C-30°C/50
°
F-86
°
F )
±2 ppm/°C
Internal mass
Unavailable
Clock function
Unavailable
Operating environment
5°C to 40°C (41°F to 104°F)
85%RH or less (No condensation)
Display refresh rate *2 5 times/second or 10 times/second
Minimum unit mass 0.001 g Counting
mode
*3
Number of samples 5, 10, 25, 50 or 100 pieces
Minimum 100% reference mass 0.100 g Percent
mode
*3
Minimum 100% display 0.01%, 0.1%, 1% (Depends on the reference mass stored.)
External calibration weight 250 g 50 g
200 g 20 g
100 g
150 g 50 g
100 g 20 g 100 g 20 g
50 g
Weighing pan diameter 90 mm
Net weight Approx. 3.4 kg
External dimensions 198 (W) x 294 (D) x 315 (H) mm
AC adapter
Confirm that the adapter type is correct for the local voltage and power
receptacle type
Power consumption Approx. 11VA (supplied to the AC adapter)
Interface RS-232C
*1 When MID., factory setting value of response rate, is used, the stabilization time is approx.
3.5 seconds.
*2 Factory setting: 5 times/second
*3 To use the counting mode or the percent mode, storing each mode as described in “9-9 Storing
Units” is required.