background image

 

13.

 

OPTIONS 

 

13-1.

 

OP-01 Bar Code Reader 

 

The OP-01 includes a bar code reader, RS-232C cable, AC adapter (100V~240V), 
power plug adapter (US to European plug) and a setting-up bar code sheet. 

 

‰

 The OP-01 bar code reader can be connected to one of the RS-232C interfaces. It 

can read bar codes for the ID number, unit weight, tare weight and comparator 
limits.

 

 

‰

 When the bar code reader reads the ID number, the scale will recall unit weight 

from ID memory instead of by using the 

 

ID

 

 key. 

 

 

‰

 Set the F-Function 

f-06

/

07

/

08-01

="

5

" to use a bar code reader.   

For example, to use Ch.1 (PORT 1), set 

f-07-01

="

5

".

 

 

  Refer to “12-6. Using a Bar Code Reader” about the bar code data and prepare bar 

code labels. 

 
 

‰

 The OP-01 bar code reader can be connected to one of the RS-232C interfaces. It 

can read bar codes for the ID number, unit weight, tare weight and comparator 
limits.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

TRIGGER switch 

Triggers the bar code 
scanner. 

Buzzer 

Beeps on successful   
read and decode. 

Cable interface port 

for cable connecting. 

LED 

Indicates RED 
as standby position. 
 
Indicates GREEN on 
successful read. 

Scanner Window 

Emits light to 
read bar code. 

• Aim the scanner at the barcode and press the trigger. 
• Ensure the scan line crosses every bar and space. 
• Do not hold the scanner directly over the barcode. 
• Maximum reading distance is approx. 15 mm (6 inches). 

WRONG 

01123456

01123456

RIGHT 

 62 

Summary of Contents for FC-5000Si























































































Reviews: