A&D FC-5000Si, Instruction Manual

Page: 15 / 86

3-3. Unit Weight By Samples
10 Sample Size
1. Three UNIT WEIGHT BY LED’s should be blinking at this
point, if not, press the RESET key to clear any unit weight.
lf you are going to use a tare container, place it on the weighing
pan.
2. Press the
SAMPLE key.
Any tare container will be
automatically tared.
The display Will show
“
Add Sample
” and “10 pcs”.
3. Place l0 sample pieces on the
weighing pan (or in the tared
container).
The weight of all 10 pieces will
be displayed.
4. Press the
ENTER key.
The display will show “
-------
”
for a moment while calculating the
unit weight. After a moment the
display will show the count, total
weight and unit weight.
At this point the scale may decide that 10 pieces
is not a large enough sample size for accurate
counting. If you refer to the
“
Add Sample
“ display again, then add the
additional number of sample pieces displayed.
‰
You can ignore the “
Add Sample
” message
and continue counting by pressing the ENTER
key. However, the results may not be accurate.
Refer to F-Function
f-01-02
.
5. You may now begin counting operations for
pieces of the same weight.
‰
Please refer to “
11. ACAI FUNCTION
” for
information concerning the ACAI counting
accuracy function.
Another 24 pieces.
If weight isn’t zero, press the TARE.
. 88888 10
881
pcs
W 2 W E I G H T ( k g )
1213456789 1.110
2 3 A S A M U U W ( g )
12341567 111.000
Total Weight Unit Weight
The weight of all The calculated
the sample pieces weight of a unit.
SAMPLE
STABL
. 88888 10
881
pcs
W 2 W E I G H T ( k g )
1213456789 0.000
2 A 3 A d d S a m p l e
123456789012345678901234567
TARE
ENTERED
ZERO
M+ SCALE
TOTAL
. 88888 10
881
pcs
W 2 W E I G H T ( k g )
1234567 89 1.110
A 2 3 A d d S a m p l e
123456789012345678901234567
Ñ
Blinking
Ò
.-------
881
pcs
W 2 W E I G H T ( k g )
1123456 -------
A
2 3 A d d S a m p l e
123456789012345678901234567
ENTER
. 88888 10
881
pcs
W 2 W E I G H T ( k g )
1213456789 0.005
A 2 3 A d d S a m p l e
121345678901 24
13