A&D FC-5000Si, Instruction Manual

Page: 53 / 86

Command Definition Notes
MR
Store the unit weight and tare weight into the specified ID
memory.
MI Store the item code into the specified ID memory.
ML Store the comparator limits into the specified ID memory.
MA
Store the total count and number of additions into the
specified ID memory.
Refer to the data
format for the reply.
CM Clear the specified ID memory contents
“CM,1.23C
R
L
F
” clears
content of
id000123
.
?FC Send the specified F-Function setting.
FC Store the specified F-Function setting value.
Refer to the data
format for the reply.
Acknowledgment and Error Codes
When the scale receives an external command, it reacts as follows:
‰
If the command requests a data reply, the scale will send the data.
For other commands, the scale will send an acknowledgment <AK> (06H) upon
acceptance of the command.
‰
If the command is I
,
S
,
T
or
Z , the scale will send a second acknowledgment
<AK> (06H) when the command operation is completed.
If an error occurs, the scale will send an error code.
‰
The error format is
E C , E n C
R
L
F
, "n" being the error number.
En Definition Notes
E0 Communication error Parity error, framing error, etc.
E1 Undefined command error The command does not exist for the scale.
E2 Scale not ready error.
The scale is not in a state where a command
could be expected.
E4 Too many characters error The command contains too many characters.
E6 Format error The command contains invalid characters.
E7 Out of range error
Value is out of range. The tare weight is more
than the capacity, etc.
51