Page 62
JANUARY 2010 - TD 220a DEPLOYMENT GUIDE, RDCP600
The recording indicator turns red during recording.
Before the system is armed the Activity reads
Stopped
. At recording start up the Activity reads
start sequence
while the deployment configuration is
set up. Next, the Activity reads
Idle
before and
between measurements.
While recording, the Activity reads
Pinging
. At the
same time the
Ping Counter
starts counting from 0 to
number of pings in deployment.
After recording the Activity reads
Processing
before
it goes back to Idle or pinging.
Check
Don’t sleep between recordings
if this suits
your deployment.
NOTE! We recommend that the instrument sleeps
between records due to the power consumption.
However, this feature may be used in the lab for test
purposes and diagnostics.
The
Setup page
lists up the configuration of the current deployment.
The
Monitor page
shows the last reading of temperature, compass, pressure and conductivity. A
graphic view illustrates the current speed.
Tapping the
Recorder
button activates the arming page. You have two options:
1. Start immediately
2. Start at a specific time
To start the instrument immediately, tap the
Start now
button.
To start at a later time select desired date and time in the date and time controls and tap
Arm
.
Figure 3-1 Recorder, Status
