manualshive.com logo in svg

AADI RDCP600, Deployment Manual

Share
Download
AADI RDCP600 Deployment Manual Download Page 18

Page  18 

JANUARY 2010 - TD 220a DEPLOYMENT GUIDE, RDCP600 

 

 

1.2

 

Deployment Configuration 

 

The Deployment Configuration holds an overview of the current configuration, a library system 
and a set of sub-configuration menus. For parameter settings we recommend that you use the 
Configuration Wizard (refer page20). Alternatively you may set the configuration for each sub-
section manually (refer page 

Error! Bookmark not defined.

) or use an already stored 

configuration (refer page 19). The items that are set up in the sections are: 

 

 

Site 

 

Profile 

 

Startup mode 

 

Wave (if installed, ref. CHAPTER 2) 

 

Timing 

 

Storage 

 

Real-time output (RS-232, PDC-4, RS-
485) 

 

 

 

 

A library system allows you to store and retrieve configurations from earlier sessions. It 
comprises a User and a Stock part.  

 

 Tap these icons to retrieve configurations from User library or Stock library 

respectively. 

 

 

 

 

 

 

 

 

 

Figure 1-2 Deployment Configuration 
Menu 

Summary of Contents for RDCP600




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands