12
ID Pairing Program
Effective Meeting:
Multi-link receiver is designed with memory, The “New Mice/KBs ID Pairing” program allows to link up to 3 sets XFAR G3/
G5/ G7/ G9/ G10 series of mice & KBs to operate on the same computer. The “A4tech G-Family” program provides the
best sharing of meeting to consolidate all member intelligences.
Portability:
The Multi-link receiver allows to link up to 3 sets XFAR G3/ G5/ G7/ G9/ G10 series of mice & KBs. You may leave it
installed on your notebook and use any paired mice and keyboards at home or in the office.
Note:
The red-colored of Multi-link receiver is also available with single gift box. It is back compatible and supports A4Tech's G3, G5, G7 and G10 series,
making them reunion as a family. Note that functions of multiple buttons will be restricted for those limited buttons of some back models. And Multi-link
function does not applicable to G6 series.
Click “
” will start to add new mice and keyboards. (For better operation, you may need another mouse to perform ID pairing
before the wireless mouse is applicable).
The Multi-link, red-shelled receiver may works with up to 3 sets of mice and keyboards simultaneously. With each attendant a mouse in hand, it
increases efficiency. See more details on below “New IDs for Mice/KBs” and “How to Add a New Device Using New Mice/KBs ID Pairing” sections.
If more mice or keyboards are used in working, please pair the new mice/KBs.
Into G-Family Management:
In this section, you will be able to manage the linked mouse and keyboard. Click “Into G-Family Management” will bring the
management screen as shown on the right.
Management of Linked Mice and Keyboards:
From the screen, you may see the listing of linked mice and keyboards with their IDs. You may tick or tick off the box to
“Enable” or “Disable” the devices, or “Delete” them forever.
Special Note:
Each mouse and keyboard of our series will have an exclusive ID code by default in the factory. Such ID code is derived
randomly from 262,144 combinations. However, in case the ID codes duplicate, please send back the products for
maintenance.
Multi-link
Management Program
.Follow on-screen instructions to perform “ID Pairing” as shown on the right, click “Next” to continue.
