A.R.C. Laser FOX 514 User Manual Download Page 25 | Manualshive

Page: 25 / 56

background image

User Manual FOX 514

September 2021

File: User Manual_FOX 514_rev3

25

5.5 Device Parts and Accessories

The basic FOX 514 Laser system includes the following basic parts:

Part-Name

Description

Article-No.

Foot Switch

Foot switch with hinge and cable

BG03808

Power Supply

FOX 514 Power supply

PS01013

Device holder

Easy mount to keep the FOX 514 secure

BG03805

Door Interlock

Door interlock, angular

KB11024

Carrying Case

Aluminum case

VP03102

Outer package

Outer package of FOX 514

VP03101

Laser safety goggles are not part of the basic equipment and are listed separately on the
purchased order. We recommend to order at least three laser safety goggles per device
(surgeon, nurse, patient, etc..).

Furthermore, the FOX 514 can be adapted to different surgical microscopes. For this
purpose, eye safety filters are available and can be ordered optionally:

Part-Name

Description

Article-No.

Laser Safety Goggles

Laser safety goggle

AS01003

Eye safety filter for
microscope

Eye safety filter 510nm

– 522nm

BG06076 (Zeiss)

BG06077 (Leica)

For information about other accessories, please contact A.R.C. Laser GmbH or the
responsible sales partner.

A T T E N T I O N

Only spare parts and applicators which are approved by A.R.C. Laser GmbH are to be used
with the device. Accessories that have not been approved can significantly impair the safety
and reliability of the device.

The use of accessories, transducers and services other than those which the A.R.C. Laser
GmbH has determined or provided, may result in increased electromagnetic interference or
reduced electromagnetic immunity of the device and could lead to incorrect operation.

«
...
23
24
25
26
27
...
»

Summary of Contents for FOX 514

























































Reviews:

No comments

Related manuals for FOX 514

Brand: DAKOTA ULTRASONICS Pages: 25

Brand: DAKOTA ULTRASONICS Pages: 36

HYDROMETTE BL Compact TF-IR 2

Brand: GANN Pages: 40

Brand: Gamry Pages: 16

Brand: QuantAsylum Pages: 70

Brand: Valhalla Scientific Pages: 43

Brand: Keithley Pages: 44

Brand: Keithley Pages: 76

Brand: Keithley Pages: 12

Brand: Keithley Pages: 281

Brand: JUMO Pages: 150

Brand: Ofs Pages: 28

DOC026.52.00769

Brand: Hach Pages: 64

Brand: Oakton Pages: 26

Brand: dacell Pages: 39

Brand: Hanna Instruments Pages: 32

Brand: R&S Pages: 35

WattNode Plus WNC-3D-240-FT10

Brand: CCS Pages: 43

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands