User Manual FOX 514
September 2021
File: User Manual_FOX 514_rev3
37
6.8 Treatment
Position the patient. Select the necessary settings. Press the READY button: the yellow LED
flashes for 3 seconds and then changes to steady light. The aiming beam is visible now and
the treatment can start.
Make sure that only one person touches the device at the same time.
A T T E N T I O N
Any serious incident that has occurred with this laser must be reported to the A.R.C.
Laser GmbH and the responsible state authority.
6.9 Laser-Stop
The Laser STOP button is on the top left side of the device. If
the Laser STOP button is pressed while starting the device, the
screen will remain black, no LED will highlight and the device
will not be able to start as its power supply voltage is cut off.
Pressing the Laser STOP button while working with the FOX
514 Laser, will instantly cut off the laser output.
Solution: Pull up Laser STOP, and restart the device. (see scection
6.2).
A T T E N T I O N
The Laser-Stop should only be used in emergencies.
The Laser-Stop button is NOT a switch off button for the device. How to switch off the
device is described in 6.10
6.10 Switching Off
Switch off the FOX 514 by folding back the cover
stand. The fiber port should be protected with the
included dust protection. This ensures that the fiber
coupling does not get damaged by any dirt or dust. If
you do not plan to use the FOX 514 Laser for a long
time, stow the laser in its carrying case.
