8e6 Technologies TAR User Manual Download Page 57

Page: 57 / 222

RELIMINARY

ETUP

ECTION

HAPTER

2: A

DMIN

ROUPS

ETUP

6 T

ECHNOLOGIES

HREAT

NALYSIS

EPORTER

SER

UIDE

Change Password

1. In the activated Account Info frame, click Change Pass-

word to open the Change Password pop-up window:

Fig. 2:3-6 Change Password

2. Type the new password in the

Enter New Password

field, and the

Retype Password

field. These entries

display as asterisks for security purposes.

3. Click

Submit

to close the Change Password pop-up

window and to activate the new password.

NOTE

: If the administrator whose password was changed is

currently logged into TAR, he/she will need to log out and log
back in again using the new password.

Summary of Contents for TAR































































































































































































































Search results

Summary of Contents for TAR

Reviews:

Related manuals for TAR

Brands by name

Popular brands

8e6 Technologies TAR, User Manual

Search results

Summary of Contents for TAR

Reviews:

Related manuals for TAR

Brands by name

Popular brands