manualshive.com logo in svg

8e6 Technologies TAR, User Manual

Share
Download
8e6 Technologies TAR User Manual Download Page 210

A

PPENDICES

 S

ECTION

    

A

PPENDIX

 C

198

8

E

6 T

ECHNOLOGIES

, 

T

HREAT

 A

NALYSIS

 R

EPORTER

 U

SER

 G

UIDE

WARNING

: When the RAID array reconstruction process begins, 

the Administrator console will close and the hard drive will 
become inaccessible.

Step 5: Contact Technical Support

Contact Technical Support to order a new replacement hard 
drive and for instructions on returning your failed hard drive 
to 8e6.

Power supply failure

Step 1: Identify the failed power supply

The administrator of the server is alerted to a power supply 
failure on the chassis by an audible alarm and an amber 
power supply LED—or an unlit LED—on the front and rear 
of the chassis.

NOTE

: A steady amber power supply LED also may indicate a 

disconnected or loose power supply cord. Verify that the power 
supply cord is plugged in completely before removing a power 
supply.

WARNING

: Be sure the correct failed power supply has been 

identified. Removing the wrong power supply will cause the 
system to crash.

Step 2: Unplug the power cord

To prevent electrical shock to yourself and damage to the 
unit, unplug the power cord from the failed power supply.

Summary of Contents for TAR































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands