8e6 Technologies TAR User Manual Download

Page: 41 / 222

RELIMINARY

ETUP

ECTION

HAPTER

1: U

SER

ROUPS

ETUP

6 T

ECHNOLOGIES

HREAT

NALYSIS

EPORTER

SER

UIDE

Edit a User Group

NOTE

: Global and group administrators can only edit user groups

they have created, and cannot edit their base groups or imported
user groups.

To edit a user group:

1. From the main User Groups management panel, select

the user group from the list in the User Groups frame.

2. Click

Edit

to display the first tab in the user groups panel

with settings made in it for that user group—i.e. if the
Patterns tab had a setting made in it, that tab displays; if
the Single Users tab was the only tab with settings made
in it, that tab displays.

3. Make any of these edits in a tab or field:

• Click a tab to access it, and then make any necessary

modifications:
• Patterns tab - add or remove a pattern.
• IP Ranges tab - add or remove an IP address

range.

• Single Users tab - add or remove one or more

users.

NOTE

: When editing the Single Users tab, users who are added

display in the Add tab, and users who are removed display in the
Delete tab.

• If necessary, edit the name of the user group in the

Group Name field.

4. Click

Save

to save your edits and to return to the main

User Groups management panel.

Summary of Contents for TAR































































































































































































































Search results

Summary of Contents for TAR

Reviews:

Related manuals for TAR

Brands by name

Popular brands

8e6 Technologies TAR, User Manual

Search results

Summary of Contents for TAR

Reviews:

Related manuals for TAR

Brands by name

Popular brands