4F Maschinentechnik LIMPAR Akku 26 Operating Manual Download Page 8 | Manualshive

Page: 8 / 38

4F Maschinentechnik LIMPAR Akku 26 Operating Manual Download Page 8

page 8 of 38

11/22/2021

Limpar Akku 26

1.2 Unintended use

Any use of the street sweeper that deviates from that described
in section 1.1 is deemed contrary to the intended purpose.
Unintended use of the street sweeper includes



use for cleaning unpaved surfaces, such as gravel paths,



use for cleaning roofs or flat roofs,



use in enclosed areas, such as halls or stables,



use for transporting people or objects,



use for moving or towing objects or vehicles,



operation in faulty condition or with safety-related faults,



operation without the standard protective covers mounted,



use by unsuitable personnel.

1.3 Product monitoring

Please notify us immediately if faults or problems occur during
operation of your street sweeper, or in the event of accidents or
near accidents.

We will help you to find a solution for the problem and we will
incorporate the knowledge gained in our future work.

Safety

«
...
6
7
8
9
10
...
»

Summary of Contents for LIMPAR Akku 26







































Reviews:

No comments