manualshive.com logo in svg

4F Maschinentechnik LIMPAR Akku 26, Operating Manual, Page: 23 / 38

Share
Download
4F Maschinentechnik LIMPAR Akku 26 Operating Manual Download Page 23

 

 

 
Limpar Akku 26 

11/22/2021 

page 23 of 38

 

 

4   Operation 

 
Before operating the machine, you must read the information in 
the chapter on safety (see Chapter 1)! 

 

WARNING! 

Danger of injury during operation of the street sweeper. 

Kicked up sweepings can hit and injure 
persons in the danger zone. 

Therefore: 

  Make sure that no one is within the danger zone (see Figure 

1). 

  Only then are you allowed to activate the power drive and 

brush rotation of the street sweeper. 

  During operation, observe the danger zone at all times. 

  Stop power drive and brush rotation if anyone enters the 

danger zone during operation. 

 

 

WARNING! 

Risk of death from hazardous sweepings. 

In the case of hazardous sweepings there is a danger of fatal 
diseases from inhaling dust (e.g. from radioactive or biological 
contamination). 

Therefore:  

  Do not use the street sweeper for sweeping hazardous 

substances. 

 

 

 

 

 

 

 

Operation 

Summary of Contents for LIMPAR Akku 26







































Reviews:

No comments