manualshive.com logo in svg

4F Maschinentechnik LIMPAR Akku 26, Operating Manual, Page: 18 / 38

Share
Download
4F Maschinentechnik LIMPAR Akku 26 Operating Manual Download Page 18

 
 

 
page 18 of 38

 

11/22/2021

 

  

Limpar Akku 26 

 

3    Commissioning 

CAUTION! 

Danger of injury and danger of property damage due to 
improper assembly of the street sweeper. 

Therefore: 

 

Preparation of the machine, including all necessary settings 

and a test run, are included in the scope of delivery and 
must be carried out by the dealer before handing the 
machine over to the customer! 

We recommend having two people assemble the street 
sweeper. 

3.1   Unpacking

 

  Place the packed street sweeper on a level surface 

  Open the box at the top 

  Cut open the box at the four corners, down to the 

ground. 

  Mount the drive wheels (see also the assembly 

instructions for the drive wheels on the separate sheet in 
the box or at the bottom of this page)  

  Align the steering bar as shown in section 3.2 and roll 

the street sweeper away from the packaging. 

  Dispose of the packaging material in accordance with 

local waste regulations. 

 

 

 

 

 

 

 

 
 
 
 
 
 

Wheel 

Here 
Linchpin 

Freewheel / 
Catch 

 Shim 
washer 

Commissioning 

Figure 4:  

 Mounting of drive wheels 

Summary of Contents for LIMPAR Akku 26







































Reviews:

No comments