manualshive.com logo in svg

4F Maschinentechnik LIMPAR Akku 26, Operating Manual, Page: 26 / 38

Share
Download
4F Maschinentechnik LIMPAR Akku 26 Operating Manual Download Page 26

 
 

 
page 26 of 38

 

11/22/2021

 

  

Limpar Akku 26 

 

4.1.2 Setting the height of the sweeping brush 

The sweeping brush should be pressed in about 1.5 cm during 
operation. 

  Loosen the locking plate on the height adjustment for the 

sweeping brush 

  Turn the knob clockwise to raise or counterclockwise to 

lower the sweeping brush until you have found the right 
height setting. 

  Fasten the knob with the locking plate. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.1.3 Operation of the charger, charging the battery 

 

 

 

The street sweeper is delivered with a charger that has 
withstood the test of time in use with this machine.  

The charger

 is designed for the battery configuration of this 

machine. 

Do not use a different charger

, since this could 

endanger people or property.  

Read and observe the user’s manual included with the 
charger. 
 

 

Operation 

Figure 12: 

Connecting the charger to the machine 

The charger should always be connected when the 

street sweeper is not in use. 

! ! 

The battery must be charged before using the machine for the first time! 

Additional 
information 
also under no. 10 

Summary of Contents for LIMPAR Akku 26







































Reviews:

No comments