4F Maschinentechnik LIMPAR Akku 26 Operating Manual Download Page 37 | Manualshive

Page: 37 / 38

4F Maschinentechnik LIMPAR Akku 26 Operating Manual Download Page 37

Limpar Akku 26

11/22/2021

page 37 of 38

11 Declaration of Conformity

EC Declaration of Conformity

in accordance with EC Machinery Directive 2006/42/EC Annex II A

As the manufacturer, we hereby declare that the following machine, in its design and
configuration, as well as in the version marketed by us, conforms to the basic safety
and health requirements of EC Directive 2006/42/EC. This declaration is voided in the
event of any modification to the machine not coordinated with us.

Designation:

Limpar Akku 26 street sweeper

Types:

FBK-G7

Manufacturer:
Company:

4F Maschinentechnik GmbH

Address:

Am Gasspeicher 6

49453 Rehden

We hereby declare conformity with the following additional regulations that apply to the
machine:

Electromagnetic Compatibility (2014/30/EU)

Applied harmonized standards:

DIN EN ISO 12100 : 2010

Other applied technical standards and specifications:

-

Authorized person for Technical Documentation:

Wolfgang Freer (address: see manufacturer’s address)

Wolfgang Freer, Managing Director

Declaration of Conformity

«
...
35
36
37
38
»

Summary of Contents for LIMPAR Akku 26







































Reviews:

No comments