4Ddoors DX250 SA, Instructions For Fitting, Operating And Maintenance

Page: 5 / 14

ENGLISH 5
2.6 Warnings
WARNING!
Danger of injury due to
unexpected gate travel!
Incorrect assembly or handling
of the operator may trigger
unwanted gate travel that may
result in persons or objects
being trapped.
Follow all the instructions provided in this manual.
Incorrectly attached control devices (e.g. buttons) may
trigger unwanted gate travel. Persons or objects may be
trapped as a result.
• Install control devices at a height of at least 1.5 m
(out of the reach of children).
• Fit permanently installed control devices (such as
buttons) so that the entire area of travel of the gate is
visible, but they are still away from moving parts.
Persons or objects may be trapped if the installed
safety equipment fails.
• In accordance with BGR 232, install at least one clearly
visible and easily accessible emergency command unit
(emergency OFF) near the gate so the gate can be
brought to a standstill in the case of danger.
WARNING!
Danger of injury during gate travel!
Gate motion can lead to injuries or damage.
• Make sure that no children play within the gate area and
no persons or objects are in the gate‘s travel range and
between the gate and the operator mechanics.
• Operate the gate operator if you are within sight of the
gate‘s area of travel and safety features are installed.
• Monitor the gate travel until the gate has reached the
end-of-travel position.
• Drive or pass through remote control gate systems only
if the gate stands still in its end-position GATE-OPEN!
3 WARRANTY
• We shall be exempt from our warranty obligations and
product liability in the event that the customer carries
out his own structural alterations or undertakes improper
installation work or arranges for same to be carried out
by others without our prior approval and contrary to the
fi tting guidelines we have provided.
• Moreover, we shall accept no responsibility for the
inadvertent or negligent use of the operator and the
accessories nor for improper maintenance of the gate
and its counterbalance.
3.1 Warranty period
• In addition to the statutory warranty provided by the
dealer in the sales contract, we grant the following
warranty for parts from the date of purchase:
• 2 years for the operator mechanics, motor, motor
control, radio equipment, accessories.
• There is no warranty on consumables (e.g. fuses,
batteries, lamps).
• Claims made under the warranty do not extend the
warranty period. For replacement parts and repairs the
warranty period is six months or at least the remainder
of the warranty period.
3.2 Prerequisites
• A claim under this warranty is only valid for the country
in which the equipment was bought. The product
must have been purchased through our authorised
distribution channels.
• A claim under this warranty exists only for damage
to the object of the contract itself. Reimbursement
of expenditure for dismantling and
fi tting, testing of
corresponding parts, as well as demands for lost pro fi ts
and compensation for damages, are excluded from the
warranty.
• The receipt of purchase substantiates your right to claim
under the warranty.
3.3 Performance
• For the duration of the warranty we shall eliminate any
product defects that are proven to be attributable to a
material or manufacturing fault.
• We pledge to replace free of charge and at our
discretion the defective goods with nondefective goods,
to carry out repairs, or to grant a price reduction.
Damages caused by the following are excluded
:
• improper fi tting and connection
• improper initial start-up and operation
• external factors such as
fi re, water, abnormal
environmental conditions
• mechanical damage caused by accidents, falls, impacts
• negligent or intentional destruction
• normal wear or de
fi cient maintenance
• repairs conducted by unquali fi ed persons
• use of non-original parts
• removal or defacing of the data label
Replaced parts become our property
.