6
FAILURE TO COMPLY WITH THE FOLLOWING SAFETY
RECOMMENDATIONS MAY RESULT IN SERIOUS PERSONAL INJURY,
DEATH AND / OR PROPERTY DAMAGE.
1. PLEASE READ CAREFULLY AND ADHERE TO ALL SAFETY AND
INSTALLATION RECOMMENDATIONS.
2. The opener is designed and manufactured to meet local regulations. The
installer must be familiar with AS/NZS 4505:2012 and any other local
regulations required in respect of the installation of the opener.
3. Unqualified personnel or those persons who do not know the
occupational health and safety standards being applicable to automatic
gates and other doors, must in no circumstances carry out installations
or implement systems.
4. Persons who install or service the equipment without observing all the
applicable safety standards will be responsible for any damage, injury,
cost, expense or claim whatsoever any person suffered as a result of
failure to install the system correctly and in accordance with the relevant
safety standards and installation manual whether directly or indirectly.
This opener incorporates a pressure sensitive Safety Obstruction Force
system. It must be configured correctly by a qualified installer. Its
purpose is to provide personal safety and may still result in damage
if a delicate object is encountered by a closing door. For additional
safety, we strongly recommend the inclusion of a Photo Beam. Photo
Beam is mandatory if autoclose mode is enabled. Autoclose mode is
only recommended for doors assessed to be a low risk installation by
a qualified installer. Autoclose mode must be disabled if the door and
drive is not operating normaly or is not regularly inspected for safe
opperation and serviced. A photo beam is mandatory for doors where
the opening force at the bottom edge of the door exceeds 400N.
5.
Remove or disengage all door locks prior to drive installation.
6.
The drive must be installed >1.8m above ground level. Installation at
less than this height is unsafe due to unguarded pinch points.
7.
The drive must not be installed on doors incorporating a wicket door
unless a safety interlock is added.
IMPORTANT SAFETY RECOMMENDATIONS
Summary of Contents for 4DS2 v1
Page 1: ...Installation instructions and user guide Sectional and Tilting door operator 4DS2 v1...
Page 2: ......
Page 4: ......