13
STEP2
(Fig.3)
WARNING:
Do not allow children around the door, opener or supporting ladder
serious injury and/or damage may result from failure to follow this warning.
Place the steel track and opener head assembly centrally on the garage floor,
with the open head furthest away from the door. Lift the front of the track up
to the door bracket. Insert the pivot pin and secure it with the split pin supplied.
STEP3
(Fig.3, Fig.4)
Lift and support the opener head (with
a ladder) so it is positioned centrally and
level. Fix the opener and track on ceiling
steel bracket A & B.
STEP4
(Fig.3, Fig.5)
Connect the straight arm to the bent
arm with the bolt.
Position and bolt the arms to the top
edge of the door using the bolt supplied.
STEP5
Lift the garage door until the shuttle locks into the chain shuttle.
Now, ready to program the openers.
Sectional Steel Track Assembly
2 Parts Steel Track
FIGURE 4
FIGURE 5
FIGURE 6
A: 1500 MM
B: 1500 MM
SLEEVE
Summary of Contents for 4DS2 v1
Page 1: ...Installation instructions and user guide Sectional and Tilting door operator 4DS2 v1...
Page 2: ......
Page 4: ......