27
A. CODES MEMORY QUANTITY SETTING
a. Press and hold the
SET
Button until “1” appears on the
display, next press the
UP
button until “A” appears on
the display to enter this function setting then release
the button.
b. Press the
SET
button again, the unit is now in remote
quantity adjustment mode. And then you will see
a figure “A” again, but with flash dot appears on the
display.
c. Press
UP / Down
button once to set the remote quantity.
(A or 1~9).
d. Figure “A”means the maximal quantity 50pcs. Press
UP/
DOWN
button once to increase or decrease quantity.
The remote quantity is set on 5pcs*N, N=1~9. (The
quantity is the multiple of 5)
e. Press the
SET
button to confirm the set and it will back
to standby status automatically and display “ll”.
NOTE
: The remote quantity is set on “A” as standard in factory.
PROGRAMMING INSTRUCTIONS
INCREASE
QUANTITY
DECREASE
QUANTITY
Summary of Contents for 4DS2 v1
Page 1: ...Installation instructions and user guide Sectional and Tilting door operator 4DS2 v1...
Page 2: ......
Page 4: ......