Installation
May 2008 – Revision 1.3
Page 16 of 62
3M™ Wireless Communication System Model XT-1
Installation Manual
Connect the Components
This section provides diagrams and information that should help you to properly
wire the system components together.
Note:
In all cases, you must have one base system for each order point (i.e., you
cannot run two or more order points from a single base station).
Base Station Wiring Terminal Identification
The following diagram identifies all of the wiring terminals and their labels.
The table that follows provides definitions of the labels and identifies where
they should be connected in the system.
