Installation
3M™ Wireless Communication System Model XT-1
Installation Manual
May 2008 – Revision 1.3
Page 25 of 62
Note:
The diagram assumes you are using Vehicle Detector 2 (VEHDET.2) for your
vehicle approach detector. You can also use Vehicle Detector 3
(VEHDEH.3). To do so, use the corresponding RELAY3_COM and
RELAY3_NO terminals.
Installing Accessory Boards in the Base Station
Accessory boards include up to three vehicle detectors, greeter module and timer
module. They must be installed into the base station according to the following
procedures.
