Configuration
3M™ Wireless Communication System Model XT-1
Installation Manual
May 2008 – Revision 1.3
Page 31 of 62
Configuration
Enter Configuration Mode
Configuration mode is a passcode-protected area that contains most of the
configuration options for the base station system. Using the access provided for
users it is possible to set up all of the functionality of the system.
To enter the configuration mode:
1.
From the Run mode menu, press and hold
Mode
.
2.
While continuing to hold
Mode
, enter your user passcode.
3.
Release
Mode
. The display will show the user name and ID number
(e.g.,
User1 ID = 1
)
Notes:
The default user password is 1234.
There are two levels of passcode: installers and users. Using a user’s
passcode permits you into the entire system menu.
Navigating the Base Station Display
Once you are in the configuration mode, you can use the buttons on the base
station display to update all configuration parameters.
Interpreting Display Information
Depending upon what you are doing, or what you can do, text on the display
screen is handled according to the following conventions:
Static or Informational
Static, informational, or non-
editable text has no markings on
it.
<Editable, not selected>
Editable items that are not
currently-selected appear inside
of outwardly-pointing pointers.
>Editable, Selected<
Editable items that are currently-
selected appear inside if
inwardly-pointing pointers.
´
Editable, in Edit Mode
³
Editable items that are currently
being edited have arrows
pointing inwardly.
[Variable, not Editable]
Variable items that cannot be
edited appear inside of square
brackets. In some cases the item
is editable, but only from a
different location in the menu.
{ information }
An on-screen explanation of a
key point or reminder appears
within curved brackets.
