3M TTS-5-1-OJ, Application Manual

Page: 43 / 48

To use the 3M Heat Trace Bill of Materials Tool, visit 3M.ca/HeatTrace To use the 3M Heat Trace Bill of Materials Tool, visit 3M.ca/HeatTrace
43
3M™ T-Splice Kit, HS-TBSK
3M™ Heat Shrink T-Splice kits designed to join three heater cables together. Kit components include
one heat shrink tube, one heat shrink tee, two silicone tubes, two parallel connectors, one butt
connector, one tie wrap, and one caution label. Use in ordinary, non-hazardous locations.
KRS™ Power Connection and End Termination Kit w/o Junction Box, KSR-CFK
Circuit fabrication kit is designed to fabricate a KSR™ Self-Regulating Heating Cable circuit with one
power connection boot and one end cap. Both power and end terminations must be made in UL-listed or
CSA-Approved junction boxes.
End Boot for DE-B, SCTK-1D
Splice connection/termination kit includes power boots, wire spring connectors, RTV adhesive.
3M™ In-Line Splice Kit, HS-PBSK
Heat shrink inline splice kit designed to join two heater cables together. Kit components include a
heat shrink sleeve, two silicone sleeves, two butt connectors, and a caution label. Used in ordinary,
non-hazardous locations.
3M™ Cable Splice, KSR™, SK-DB
This cable splice kit is designed to fabricate an in-line splice between two pieces of overjacketed cable.
The kit allows for field fabrication of heating cable should the cable become damaged during installation.
Easy-to-use kit includes splice lugs, self-vulcanizing tape, and heat shrink tubing.