3M Dynapro ET 3170 Terminal Series B, Installation Manual

Page: 96 / 125

3M Touch Systems Proprietary Information
60
3M Dynapro ET 3170 Terminal User’s Installation Guide
Dust and moisture resistance
FCC compliance
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide a reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy, and if installed and used in accordance with the
instruction manual, may cause interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference, in
which case the user will be required to correct the interference at his own expense.
CE and EMC emissions compliance
This is a Class A product. In a domestic environment this product may cause radio
interference, in which case the user may be required to take adequate measures.
!
The ET 3170 terminal complies with the CE mark related to the Low Voltage
Directive 73/23/EEC as confirmed in the Declaration of Conformity.
Canadian emissions compliance
The ET 3170 terminal complies with the CE mark related to the EMC Directive
89/336/EEC as confirmed in the Declaration of Conformity.
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appariel numerique de la classe A respecte toutes les exigences due Reglement
sur le material brouilleur du Canada.
Electromagnetic compatibility immunity standards
NEMA 250 Electrical Enclosures, Type 12, Type 4, Type 4X
IEC 529 Degrees of Protection Provided by Enclosures, IP66
Electromagnetic compatibility immunity standards EN61000-6-2
ITE immunity EN55024
Electrostatic discharge EN61000-4-2
Radiated immunity EN61000-4-3
Electrical fast transient EN61000-4-4
Surge transient EN61000-4-5
Conducted immunity EN61000-4-6
AC sags and dropouts EN61000-4-11