3M Dynapro ET 3170 Terminal Series B, Installation Manual

Page: 42 / 125

3M Touch Systems Proprietary Information
6
3M Dynapro ET 3170 Terminal User’s Installation Guide
Communications
The following communication connectors are at the rear of the terminal.
!
RS-232/RS-422/RS-485 serial port
!
Standard 101-key interface with an industry-standard AT-type keyboard
connector
Power supply
The power supply is AC with the following voltage and frequency requirements:
!
Voltage: 115 to 230 VAC, autoranging
!
Frequency: 50 to 60 Hz
The backlight and extending its life
The typical life expectancy of the backlight is 50,000 hours. A Backlight
Replacement Kit (including instructions) is available from 3M Touch Systems.
You can extend the life of the display and backlight by setting them to turn off
automatically after 30 minutes of inactivity. For instructions, see “Display
Activity” on page 31.
Configuration overview
The terminal settings can be configured to suit your application. Here are two
ways you might choose to do so:
!
By accessing a “hidden” Setup switch, using the TouchSurround.
!
By opening the Setup screen, an interactive feature to help you set the
operating parameters of the terminal. Parameters are tailored to the user’s
preference, including cursor type and background.
For details on these and other configuring options, refer to Chapter 5.